Search This Blog

Sunday, June 15, 2014

Cisco HSRP state monitor using PRTG

Here is a post which describes how to monitor HSRP state using PRTG network monitor.

Add SNMP custom (see this post for screenshots: http://www.madari.co.il/2014/04/prtg-monitors-pps-on-cisco-routers.html) with the following SNMP OID:

1.3.6.1.4.1.9.9.106.1.2.1.1.15.1.1

The sensor will retrieve integer value which will represent the state of the HSRP group.


And the result:


As we can see the router returns the value “6” which means that he is in active state, a value of “5” will indicate that he is in standby state.


Here is the SNMP object information taken from Cisco SNMP Object Navigator:

Object  cHsrpGrpStandbyState
OID        1.3.6.1.4.1.9.9.106.1.2.1.1.15
Type      HsrpState
1:initial
2:learn
3:listen
4:speak
5:standby
6:active
Permission          read-only
Status   current
MIB        CISCO-HSRP-MIB ;   -   View Supporting Images  this link will generate a new window
Description         The current HSRP state of this group on this interface.






2 comments:

  1. מאמר מועיל ונפלא בהזדמנות זאת אני רוצה להמליץ על { קבלן שלד לוילה } שבנה לי את הבית ועשה עבודה נפלאה ומדוייקת. קבלן ברמה גבוהה

    ReplyDelete
  2. No doubt this is an excellent post I got a lot of knowledge after reading good luck. Theme of blog is excellent there is almost everything to read, Brilliant post. Desktopcon's 240hz monitor

    ReplyDelete